3-11
3. Connector-Terminal Block Cables
These cables are used for connecting to Controllers for which no special cable is provided. The cables
and terminal block convert the Servo Driver’s Control I/O Connector (CN1) signals to terminal block
connections.
Connector Terminal Block Cable Remarks
XW2B-50G5
R88A-CTWjjjN
The empty boxes in the model numbers are for
cable length. The cables can be 1 or 2 meters long.
(For example, R88A-CTW002N is 2 meters long.)
4. General Control Cable and Control I/O Connector
These cables and connector are used for connecting to Controllers for which no special cable is pro-
vided, and when the cable for the Servo Driver’s control I/O connector is prepared by the user.
Name Cable Remarks
General Control Cable
R88A-CPWjjjS
The cable is attached to a connector that connects
to the Control I/O Connector (CN1). The empty
boxes in the model numbers are for cable length.
The cables can be 1 or 2 meters long. (For
example, R88A-CPW001S is 1 meter long.)
Control I/O Connector R88A-CNU11C This is the connector for connecting to the Control
I/O Connector (CN1). (This item is a connector
only.)
5. Power Cable
Select a Power Cable to match the Servomotor that is to be used.
Servomotor type Power Cables for Servomotors
Without Brakes
Power Cables for Servomotors
With Brakes
3,000-r/min
30 to 750 W
R88A-CAWAjjjS R88A-CAWAjjjB
Servomotors
1 to 2 kW
R88A-CAWCjjjS R88A-CAWCjjjB
3 to 5 kW
R88A-CAWDjjjS R88A-CAWDjjjB
3,000-r/min Flat-style
100 to 750 W
R88A-CAWAjjjS R88A-CAWAjjjB
Servomotors
1.5 kW
R88A-CAWBjjjS R88A-CAWBjjjB
1,000-r/min
300 to 900 W
R88A-CAWCjjjS R88A-CAWCjjjB
Servomotors
1.2 to 3 kW
R88A-CAWDjjjS R88A-CAWDjjjB
4 kW
R88A-CAWEjjjS R88A-CAWEjjjS
(For Power Connector)
R88A-CAWEjjjB
(For Brake Connector)
5.5 kW
R88A-CAWFjjjS R88A-CAWFjjjS
(For Power Connector)
R88A-CAWEjjjB
(For Brake Connector)
System Design and Installation
Chapter 3
To Next Page
Loading...
Need help?
General
