Omron R88D-1SN ECT Series Startup Guide

14
2. Before You Begin
2.1. Installing the Sysmac Studio
The Sysmac Studio is the Support Software that you use for an NJ-series Controller. On it, you can set-up
the Controller configurations, parameters, and programs, and you can debug and simulate operation.
Install the Sysmac Studio on your computer.
Refer to the NJ-series Startup Guide for CPU Units (Cat. No. W513) for the procedure to install the
Sysmac Studio.

Omron R88D-1SN ECT Series Specifications

General

Feedback	Incremental encoder, Absolute encoder
Position Control	Yes
Speed Control	Yes
Torque Control	Yes
Communication Interface	EtherCAT
Power Supply Voltage	200 to 240 VAC
Output Power	0.1 to 1.5 kW
Input Voltage Range	170 to 264 VAC
Control Method	Sine-wave PWM control
Main Circuit Power Supply	200-240 VAC
Applicable Motor Capacity	0.1 to 1.5 kW
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Encoder Error
Ambient Operating Temperature	0 to 55°C
Vibration Resistance	4.9 m/s² (10 to 55 Hz)
Shock Resistance	98 m/s2
Weight	Varies by model