Omron RX - Page 128

4-23
4-2 Function Mode
4
Functions
* Even if free V/f voltages 1 to 7 are set to 800 V, the Inverter cannot output voltage higher than
the input voltage or the value of the motor voltage selection.
Use thorough caution to verify that the output characteristic setting is proper. An improper setting
causes overcurrent during acceleration or deceleration, or vibration of the motor and/or machine.
b101 Free V/f voltage 1
0.0 to 800.0
Set output voltages
for each break point.
*
0.0 V
b103 Free V/f voltage 2
b105 Free V/f voltage 3
b107 Free V/f voltage 4
b109 Free V/f voltage 5
b111 Free V/f voltage 6
b113 Free V/f voltage 7
Related functions A044, A244, A344
Parameter No. Function name Data Description Default setting Unit
(Example)
Output voltage (V)
V7
V6
V5
V4
V1
V2, V3
f10
f2 f3 f4 f5 f6 f7
Output frequency (Hz)
Output
voltage (V)
V7
V6
0f6
f7 Output frequency (Hz)
Select the voltage or motor
voltage available for output.