Omron RX - Page 324

5-7
5-1 Protective Functions and Troubleshooting
5
Maintenance Operations
Function List of the DIP and Rotary Switches on the digital command board (3G3AX-DI01)
How to Read the Input Mode List
Example 1. Switch setting when setting the frequency with a resolution of 1 Hz, via binary input
(BIN) in the batch input mode (PAC)
Example 2. Switch setting when setting the frequency with a resolution of 0.1 Hz, via BCD input,
and setting the acceleration/deceleration time with a resolution of 0.1 sec, via BCD in-
put in the dividing input mode (DIV)
DIP switch
(TYPE)
Rotary
switch
(CODE)
Resolution setting
Set frequency
Acceleration/Deceleration
time setting
Torque
limit
setting
Posi-
tion
setting
Switch No.
Setting
code
0.01 Hz 0.1 Hz 1 Hz Rate 0.01 sec 0.1 sec 1 sec 1% 1 pulse
12
ON:
BCD
input
(BCD)
OFF:
Binary
input
(BIN)
OFF:
Batch
input
mode
(PAC)
0 {
1 {
2 {
3 {
4 {
5 For factory adjustment (Do not set)
6 {
7 to F For factory adjustment (Do not set)
ON:
Dividing
input
mode
(DIV)
0
{
{
{{
1 {
2 {
3
{
{
4 {
5 {
6
{
{
7 {
8 {
9
{
{
A {
B {
C to F For factory adjustment (Do not set)
TYPE CODE
12
2
OFF: BIN OFF: PAC
TYPE CODE
12
4
ON: BCD ON: DIV