85
Starting the Support Tool Section 6-2
6-2 Starting the Support Tool
To start the S8M Support Tool, select Programs - OMRON - S8M Support
Tool - S8M Support Tool from the Start Menu.
When the Support Tool starts, it opens the Parameter Setting Window's Basic
Settings Tab Page. The Parameter Setting Window is made up of the Basic
Settings and Branch Output Settings Tab Pages, which can be selected by
clicking the corresponding tab at the bottom of the page.
The operations in the Parameter Setting Window can be selected from the
Menu Bar.
Menu Bar Items The Support Tool settings and operations can be selected by opening the pull-
down menus from the Menu Bar.
▲
▲
Menu Bar
Pulldown menu
To Next Page
Loading...