96
Other Settings Section 6-5
Note The run time cannot be reset from the Support Tool.
6-5 Other Settings
Communications
Settings
These parameters set the communications settings for the computer's RS-
232C port.
If an error message like the one below is displayed when you attempt to
upload parameters, download parameters, or monitor operation, verify that
the COM port settings match the S8M's communications settings.
Select Communications - COM Port Settings.
The Communication Settings Window will be displayed. Set each parameter
as needed.
Button Function
Reset Clears the error and supplies power at the branch output
that was cut off.
Present Values Switches to the Present Values Window.
Close Closes the Status Window.
To Next Page
Loading...