91
Setting and Saving Parameters Section 6-3
Uploading the
Parameters
This operation reads the S8M's parameters from the S8M to the Support Tool.
Connect the S8M and computer with the RS-232C cable.
1,2,3... 1. Select Communications - Upload.
2. When Upload is selected, the following popup window will open.
3. Click the Yes Button to start the upload. If the parameters were read nor-
mally, the following popup window will be displayed.
Click the OK Button.
Note The parameters can be uploaded regardless of the S8M's operating mode.
RS-232C cable
Read parameters.
Support Tool
To Next Page
Loading...