94
Monitoring Section 6-4
Run time (kh) Displays the run time. (The run time cannot be reset from
the Support Tool.)
Current connection status Displays the connection status.
Green: Connected.
White: Cut off by an operation or external signal.
Red: Cut off due to an error. (The indicator will also
be red when simultaneously cut off by an exter-
nal operation.)
Button Function
Peak output current clear Clears the peak output current value.
Connect branch output Connects the branch output.
An output cannot be connected while the external trip-
ping input is ON or there is an abnormal current or
voltage.
Disconnect branch output Disconnects the output.
Startup Sequence Connects the branch outputs in the pattern set with the
startup sequence settings.
Shutdown Sequence Disconnects the branch outputs in the pattern set with
the shutdown sequence settings.
Reset Clears the output cutoff triggered by an abnormality or
external tripping input, and reconnects the output. If
the output was cut off by a Support Tool operation
(shutdown sequence or output trip), the error will be
reset, but the output will not be connected.
Monitor Status Switches to the Status Window.
Close Closes the Present Values Window.
Window item Description
To Next Page
Loading...