No. 20S071-01
STC-HD213DV / STC-HD213DV-CS / STC-HD213SDI / STC-HD213SDI-CS /
STC-HD213DVN / STC-HD213DVN-CS / STC-HD213SDIN / STC-HD213SDIN-CS
Product Specifications and User
40/94
DSP: WhiteBalance
The settings for white balance are changeable. These can be change individual DSP User Preset.
1) White balance mode
Selects the white balance mode from “Manual” and “Auto (AWB)”
“Manual” mode is white balance process with manual white balance gain “White balance R gain” and “White
balance B gain”.
“Auto (AWB)” mode is white balance gain is adjusting automatically.
2) Pull-in limit in auto white balance mode
Selects enable or disable pull-in limit for R and B for AWB mode.
3) White balance R gain
Sets R gain for manual white balance mode.
This setting is valid when selecting “Manual” at white balance mode.
4) White balance G gain
Sets G gain for white balance mode.
This setting is valid for both white balance mode.
5) White balance B gain
Sets B gain for manual white balance mode.
This setting is valid when selecting “Manual” at white balance mode.
6) AWB integration-frame number
Sets the number of frames to AWB process. (AWB processing speed)
7) AWB rapid control frame number
Sets the number of frames for rapid AWB processing when power on camera or changes displaying mode.
(AWB processing speed when power on camera or changes displaying mode)
To Next Page
Loading...
Need help?
General
