Omron STC-HD213 Series - Introduction to STC-HD213 Cameras; Key Features; Product Number Naming Method

No. 20S071-01
STC-HD213DV / STC-HD213DV-CS / STC-HD213SDI / STC-HD213SDI-CS /
STC-HD213DVN / STC-HD213DVN-CS / STC-HD213SDIN / STC-HD213SDIN-CS
Product Specifications and User
’
s Guide
7/94
3 Introduction
This document describes specification of following cameras:
STC-HD213DV / STC-HD213DV-CS (DVI output model)
STC-HD213SDI / STC-HD213SDI-CS (SDI output model)
STC-HD213DVN / STC-HD213DVN-CS (Non-Memory DVI output model)
STC-HD213SDIN / STC-HD213SDIN-CS (Non-Memory SDI output model)
3.1 Features
 1080p / 1080i / 720p output
 DVI / SDI Output
 Rolling shutter CMOS image sensor
 Camera adjustment with OSCD (On Screen Character Display) through Remoter Controller (Option)
 Configurable many parameters through Control Software
 Eight configurable DSP User Presets can be saved
 Defective Pixel Correction (JTBCtrl software is required)
 Standard models (STC-HD213DV, HD213DV-CS, HD213SDI and HD213SDI-CS) and non-memory models that do
not support “Still image”, “Digital zoom” and “Extended exposing” (STC-HD213DVN,
HD213DVN-CS, HD213SDIN and HD213SDIN-CS) are available.
3.2 Product Number Naming Method
STC-HD213xx-x
Output
DV: DVI Output
SDI: SDI Output
DVN: DVI Output (Non-memory)
SDIN: SDI Output (Non-memory)
Mount
None: C Mount
CS: CS Mount