No. 20S071-01
STC-HD213DV / STC-HD213DV-CS / STC-HD213SDI / STC-HD213SDI-CS /
STC-HD213DVN / STC-HD213DVN-CS / STC-HD213SDIN / STC-HD213SDIN-CS
Product Specifications and User
47/94
DSP: Aperture
The settings for aperture (edge enhancement) are changeable. These can be change individual DSP User Preset.
Aperture
1) Aperture H Gain
Sets horizontal aperture gain.
When setting great value, horizontal edge enhancement becomes strong.
2) Aperture V Gain
Sets vertical aperture gain.
When setting great value, vertical edge enhancement becomes strong.
3) Aperture coring
The noise level also emphasizes when using aperture function.
The SN ratio deteriorate for other than edge parts is prevented by cutting signal level that smaller than this
setting.
The image becomes soft image if this setting sets too large.
To Next Page
Loading...
