Omron STC-HD213 Series - Page 50

No. 20S071-01
STC-HD213DV / STC-HD213DV-CS / STC-HD213SDI / STC-HD213SDI-CS /
STC-HD213DVN / STC-HD213DVN-CS / STC-HD213SDIN / STC-HD213SDIN-CS
Product Specifications and User
’
s Guide
50/94
6) Vertical line 1 maker position and Vertical line 2 marker position
Sets displaying position (pixels) for vertical line individually.
When setting small value, vertical line is displaying at right part of image.
When setting great value, vertical line is displaying at left part of image.
7) Vertical line 1 thickness and Vertical line 2 marker thickness
Sets thickness (size) for vertical line individually.
When selecting “0”, vertical line does not display.
When selecting small value, thin vertical line is displaying.
When selecting great value, thick vertical line is displaying.
Shadow Mask
1) Shadow mask
Selects enable or disable for displaying shadow mask.
When selecting “Enable”, shadow mask is displaying.
It is necessary to set shading level and areas for shadow mask.
When selecting “Disable”, shadow mask does not display.
2) Shadow mask shading level
Sets shading level for shadow mask.
When setting 0, 100% transparent shadow mask and borders of shadow mask are displaying.
When setting 255, 100% black shadow mask is displaying.
3) Horizontal shadow mask top position
Sets border of shadow mask from top of image.
4) Horizontal shadow mask bottom position
Sets border of shadow mask from bottom of image.
5) Vertical shadow mask left position
Sets border of shadow mask from left of image.
6) Vertical shadow mask right position
Sets border of shadow mask from right of image.