Omron STC-HD213 Series - Page 52

No. 20S071-01
STC-HD213DV / STC-HD213DV-CS / STC-HD213SDI / STC-HD213SDI-CS /
STC-HD213DVN / STC-HD213DVN-CS / STC-HD213SDIN / STC-HD213SDIN-CS
Product Specifications and User
’
s Guide
52/94
DSP: Pseudo
The settings for Pseudo mode (color, threshold and slope) are changeable.
These can be change individual DSP User Preset.
Pseudo
1) Picture mode selection
Selects picture mode from “Normal” and “Pseudo”.
When selecting “Normal”, original image is output from camera.
When selecting “Pseudo”, pseudo image is output from camera.
It is necessary to set color, threshold and slope.
2) Background pseudo color
Selects color for background of pseudo image.
3) Overlay graphics pseudo color
Selects color for foreground of pseudo image.
4) Normal color mode shadow mask line color
Selects color of boarder of shadow mask from “Black” or pseudo color.
5) Pseudo color threshold
Sets threshold for banalization of pseudo image.