9. Program
61
●2. PMCR instruction execution management
No. Overview Description
2.1. PMCR instruction
executing
Enters the PMCR instruction executing status.
The executing status will be reset at a normal end or an
error end of the program.
2.2. PMCR instruction
execution processing
The PMCR instruction is executed under the following
conditions.
•Port No.7 can be used.
•The protocol macro is not being executed.
Precautions for Safe Use
Please check the overall program before specifying the area to save the receive data of
R instruc a may be written in an uninten area. PMC tion. Or, dat ded memory
Precau
tions
for Correct Use
This pro
ation
Do not use Communications Port No.7 for other purpose.
no choice but to use Communication Port No. 7, confirm that the Communications
Flag (A202.07) is ON.
gram uses Communic s Port (internal logical port) No.7.
If you have
Port Enabled
To Next Page
Loading...
Need help?
General
