9. Program
62
No.
Overview Description
2.3. Normal/error detection
processing
m is executed normally or
llowing
requirements are met.
(1)Normal end of PMCR instruction (No PMCR
instruction error)
(2)Normal end of communications sequence (No
tination
When any of the above errors occurs, the
corresponding error flag turns ON.
Detects whether the progra
abnormally.
It is considered as normal end when all the fo
communications error )
(3)Receives normal message from the des
device (No destination device error)
To Next Page
Loading...
Need help?
General
