Omron Sysmac CJ Series User Manual

9. Program
64
●4.Error end state management
No. Overview Description
4.1. Error end processing Turns ON the error end flag when an error end of the
program is determined in 2.3 Normal/error detection
processing.
4.2. Response code setting If an error occurs, sets the corresponding response
code in the response code storage area.
Additional Information
Refer to 9.8 Error Processing in this document for response codes.

Omron Sysmac CJ Series Specifications

General

Brand	Omron
Model	Sysmac CJ Series
Category	Rfid Systems
Language	English