9. Program
70
9.
Th
Additional Information
6.5. Send Message Settings
is section explains the settings of the send message.
For details on the settings of the send message, refer to 3-4 Communication Message
A ocol Operation Manual (Cat. No. W344). ttributes in the CX-Prot
<Send message setting screen>
●Settings of GETRVER send message
<h>
SD_
+"GETR"+" "+"typ"+" "+"fwv"+<c>+<t>
(3) (4) (5) (6) (7) (8) (1) (2)
No. Code Description
(1) der) <h > (Hea Type: Code, Data: SOH
(2) to (6) “GETR”,””,”typ”,””,”fwv” Constant ASCII
(7) code) <c> (Check Type: LRC (horizontal parity) (0) (2-byte ASCII)
Setting range: 2 to 6
(8) F <t> (Terminator) Type: Code, Data: CR+L