Omron V600 Series Operation Manual

117
Revision History
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
Cat. No. Z044-E1-3
Revision code
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code Date Revised content
1 June 1990 Original production
2 May 1993 This manual has been extensively rewritten and reformatted. Numerous additions
and deletions were made.
3 August 1998 Information relating to EC Directives added throughout the manual.
V600-CA1A-Vj and V600-CA2A-Vj
added throughout the manual.
“FA ID System” changed to “RFID System” throughout the manual.
Pages 48, 49:
3-6-2 Example of BASIC Program Using SYSMAC WAY Com-
mands removed.
Page 79:
5-3-3 Removing Terminal Cover added.
Appendix D Conformity to Standards added.

Omron V600 Series Specifications

General

Operating Frequency	13.56 MHz
Supported Standards	ISO 15693, ISO 18000-3
Read Range	Up to 70 mm (depending on tag and environment)
Power Supply	24 VDC ±10%
Operating Temperature	-10 to 55°C (with no icing or condensation)
Humidity	35% to 85% (non-condensing)
Communication Interface	RS-232C