226
SECTION 5
V600 Commands
RFID System
User’s Manual
SECTION 5
Communications
READ ERROR INFORMATION (CF)
The READ ERROR INFORMATION command is used to read the most recent error log information
stored in the Controller.
1:1 Protocol
Process code Specifies the process to execute.
“00”: Read error information
“01”: Clear error information
End code Indicates the execution result for the command.
“00” indicates a normal end.
Refer to List of End Codes for information on other end codes.
p. 235
New error log information Up to 30 records of error log information will be returned.
Error log information is returned in chronological order with the newest records first. Each record
is five characters long.
Command
CF
22
2
* CR
Command
code
Terminator
×
Process
code
×
Response
R
CF
1
00
RD
22
n
2
*
CR
New error log information
4
D1
07
Command
code
Terminator
End code
RD 1 70
Generated error code
Head No. with error (for communications with Data Carriers only)
A space will be output for when the error is not a communications error.
Error command
To Next Page
Loading...
