25
RFID System
User’s Manual
SECTION 1
Application Flowchart
SECTION 1
Product Overview
Application Flowchart
Connect the system.
Set the ID Controller's communications conditions.
Preparation
Communications preparation
Trial operation
Perform a communications test between the ID Controller and host
device.
Perform a communications test between the Tags and Antennas.
Check the ambient environment.
Perform actual communications using commands.
Communications
p. 28
Install the system.
p. 30
p. 58
p. 77
p. 78.
p. 245
p. 97
To Next Page
Loading...
