Omron VS mini J7 - 5-2 V;f Control

37
Outline of Operation Chapter 3-2
Status Monitor
Item Display Display unit Function
U01 Frequency reference Hz Monitors the frequency reference. (Same as FREF)
U02 Output frequency Hz Monitors the output frequency. (Same as FOUT)
U03 Output current A Monitors the output current. (Same as IOUT)
U04 Output voltage V Monitors the internal output voltage reference value of the
Inverter.
U05 DC bus voltage V Monitors the DC voltage of the internal main circuit of the
Inverter.
U06 Input terminal status --- Shows the ON/OFF status of inputs.
U07 Output terminal status --- Shows the ON/OFF status of outputs.
U09 Error log
(most recent one)
--- Displays the latest error.
U10 Software No. --- OMRON use only.
Not
used
: Input ON : No input
Terminal S1: Forward/Stop
Terminal S2: Multi-function input 1 (S2)
Terminal S3: Multi-function input 2 (S3)
Terminal S4: Multi-function input 3 (S4)
Terminal S5: Multi-function input 4 (S5)
Not
used
: Closed : Open
Terminal MA: Multi-function contact
output
Error