ONEFINITY Elite Series - Specifications and Features

Rapid Rate:
X Axis: 400 inches/min (accel 750 km/min2)
Y Axis: 400 inches/min (accel 750 km/min2)
Z Axis: 300 inches/min (accel 750 km/min2)
Cung Area Woodworker:
X Axis: 32- 1/4 inches
Y Axis: 32- 1/4 inches
Z Axis (Gantry Clearance): 5 inches
Cung Area Journeyman:
X Axis: 48- 1/8 inches
Y Axis: 32- 1/4 inches
Z Axis (Gantry Clearance): 5 inches
Cung Area Foreman:
X Axis: 48- 1/16 inches
Y Axis: 48– 3/4 inches
Z Axis (Gantry Clearance): 7 inches
Specicaons:
16mm Ball Screws on X and Y axis
16mm Ball Screw on Z axis
Chrome plated, hardened steel linear shas on all axis
5 motor driver channels
15 inch Onenity Masso
Up to 256 microstepping
250k steps/second on each motor output
Infrared homing sensors with auto squaring
Feature:
Advanced, custom designed, Onenity MASSO Touch
Massive 15-inch high denion industrial capacive touch LED screen
Rigid, high precision, hardened steel, linear moon Shas
High speed, long travel, Z-20 heavy duty Z-Slider
Powerful “an-skip,” closed loop stepper motors
Conveniently located Emergency Stop
Plug and Play wiring supported by drag chains
Wi-Fi enabled
Built in Auto on/o router outlet
Built in Auto on/o Vacuum outlet
Plug and play XYZ Probe (oponal)
Plug and play Tool Seer (oponal)
Power Loss Recovery
Jump to Line
Connuous and incremental jogging via touch screen
Feed Rate Override - Adjust feed rate during a carve
Mulple Work osets (G54-G59)
Micro Tramming
Quick and easy setup - start carving in under an hour
Solid, self supporng QCW with leveling feet (oponal)
7, 12 & 24 wa Laser (oponal—plug and play)
Fixed or Rolling - Folding Stand with wobble free leveling feet (oponal)
Spindle support with on board controls
Each unit fully producon tested with a test carve
A large “how to” library with a very helpful and supporve community
Powerful Carveco Maker Advanced 3D Cad Soware (1 year subscripon)
Specications and Features
General Disclaimer:
While Onenity has made every eort at the me of publicaon to ensure the accuracy of the informaon provided herein, product specicaons, conguraons, system/component/opons availability
are all subject to change without noce. Product design specicaons and colours are subject to change without noce and may vary from those shown. Errors and omissions excepted. Images displayed
are for illustraon purposes only. The images are intended to help illustrate the product and it’s funcons and are not indicave of actual relave dierences.