The Onenity is a multifunctional CNC gantry milling system for the permanent and regular
processing of wood, plastics and non-ferrous metals.
Thanks to the innovative design, how and where you carve is limitless! Feel like carving
an intricate inlay into your dining table, no problem? Have a small shop where space
is limited, Onenity has been designed to be quickly dismantled and stored!
With Fast Travel Precision Ball Screws, gone are the stretchy belts and high mainte-
nance Lead Screws found on similarly priced machines. Hardened Steel Hollow Linear
Motion Shafts means no more plastic wheels that require frequent adjustment and a
powerful CNC controller with built in CAM software and HD Touch Display allows for opera-
tion without a computer!
The machine has three axes which are oset by 90°. This way, it is possible to travel to any
point within the working space. Each axis is equipped with up to two stepper motors and Infra-
red homing. The stepper motors drive the movable axes elements via precision ball screws.
The position of the axis is determined during the reference run (homing cycles), at the begin-
ning of the job, with the aid of the homing. The machine table may consist of any solid at
surface big enough to mount the Rails and Controller. The Onenity consists of the following,
sometimes optional, components: - Onenity Elite Foreman, Journeyman or Woodworker; -
Onenity MASSO electronic control unit, Power Supply Controller in a separate aluminum
housing, Z-Slider, Wire harness and Hardware.
Description
To Next Page
Loading...