General Instructions:
These operating instructions explain the Onenity and the correct handling of the CNC sys-
tem. Please read these operating instructions and accompanying documents in their entirety
before commissioning of the system in order to become familiar with the characteristics and
the operation of the product. The improper operation of the CNC gantry milling system can
lead to damage to the product and property and can cause serious injuries, electric shock
and / or re. It is imperative to adhere to the safety instructions listed in these operating in-
structions at all times. Should you have any questions or concerns prior to initial use of the
CNC system or the need for further information, do not hesitate to contact us prior to the
commissioning of the CNC system.
Safety Instructions and Protective Measures:
(General Safety Warnings for the Use of Power Tools )
Work Area Safety
NOTICE: Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Caution: Do not operate the power tool in explosive atmospheres, such as in the
presence of ammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
NOTICE: Keep children and bystanders at a distance while operating a power tool. Distrac-
tions can cause you to lose control and can result in accidents.
Caution: Operate the Onenity only in interior spaces on a solid, horizontal table or
workbench.
Electrical Safety:
Warning: Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with grounded power tools. Unmodied plugs
and matching outlets will reduce the risk of electric defects and malfunctions.
Warning: Do not expose power tools to moisture. The power tool is only suitable for
indoor use. Water entering a laser tool will increase the risk of electric shocks.
Safety Rules
To Next Page
Loading...