Personal Safety:
Caution: Stay alert, watch what you are doing and use common sense when operat-
ing a power tool. Do not use a power tool while you are tired and/or under the inu-
ence of drugs, alcohol or medication. A moment of inattention while operating a
power tool may result in serious personal injury.
NOTICE : All persons who operate the power tool must have read and fully understood all
relevant safety and operating instructions. Misunderstanding may result in personal injury.
Caution: Use personal protective equipment. Always wear eye protection. Protec-
tive equipment, such as a suitable dust mask or ear protection, reduces the risk of
injuries.
NOTICE: Dress properly. Do not wear loose clothing or jewelry. Pin your hair above your
shoulders so that it cannot get caught in the Ball Screws and linear guides or moving parts.
Caution: This tool is controlled by a computer. During operation, it cannot be con-
trolled directly. Lack of caution or expertise as well as program errors can lead to un-
expected movements.
Caution: Do not touch the insertion tools or motors as they can heat up signicantly
during operation.
Caution: Never place any parts of the tool or accessories in the mouth as this can
lead to serious injuries.
Protective Measures:
The Onenity has been constructed for advanced users and is only to be operated by techni-
cally skilled persons above the age of 16. The CNC gantry milling system as well as associated
tools, small parts and electrical components are to be stored outside the reach of children.
The operator is solely responsible for understanding and reading the machine user guide and
all relevant operating instructions in their entirety. These documents should always be stor-
age in immediate vicinity of the machine. The manufacturer`s instructions concerning the
CNC machine and the tools, such as the milling spindle, are to be adhered to. The CNC gantry
milling system is only to be used in a technically perfect condition which is to be ensured prior
to each operation. The emergency switch as well as, if applicable, additional safety devices,
always need to be easily accessible and fully functional. The use of liquids with the machine,
such as the application of a coolant pump, is prohibited as it can damage the electronics. The
use of lubrication systems is allowed. Please take into consideration that in this case the MDF
machine table is not used as its MDF panels can swell and, thus, be destroyed.
Safety Rules
To Next Page
Loading...