Read the following carefully before operating the machine.
1. Keep the working area clean and ensure adequate lighting is available.
2. Do not wear loose clothing, gloves, bracelets, necklaces or ornaments.
3. Do wear face, eye, respiratory and body protection devices as indicated for the operation
or environment.
4. Ensure that the power is disconnected from the machine before tools are serviced or any
attachment is to be tted or removed.
5. Never leave the machine with the power on.
6. Do not use dull, gummy or cracked cutting tools.
7. Ensure that the keys and adjusting wrenches have been removed and all the nuts and
bolts are secured.
8. Hearing protection — ear plugs or mus, for long jobs doubling up on ear plugs or mus
may be desirable. Hearing damage is cumulative and irreversible, so one should err on the
side of caution
9. Use care when handling endmills, both to avoid being cut, and to avoid damaging them.
Handling them with suitable gloves, or using a cloth to avoid contaminating them is recom-
mended. Inspect them carefully before each use and ensure that they are securely held by the
collet.
10. Never leave the machine running unattended/unsupervised.
11. Always inform someone before operating the machine and check in with them after suc-
cessfully completing work.
Workspace:
The workspace needs to provide enough space around the Onenity CNC for the machine to
work comfortably and to be able to fully use its traveling paths. Additionally, a safe distance
to possibly nearby positioned machines is to be maintained. The location of the machine as
well as the workplace surrounding the machine has to be suciently illuminated.
As with all machinery, there are certain hazards involved with the operation and use of your
machine. Using it with caution will considerably lessen the possibility of personal injury. How-
ever, if normal safety precautions are overlooked or ignored, personal injury to the operator
may result. If you have any questions relating to the installation and operation, do not use the
equipment until you have contacted your supplying distributor.
Safety Rules
To Next Page
Loading...