Additional Button Functions:
Feedhold Esc = Pause (Pink Arrow)
MDI = Manually enter gcode (Blue Arrow)
Coolant Flood= Turn on Vacuum (Yellow Arrow)
Go To Work Origin = Go to XY zero (Purple Arrow)
Jump to Line = Selects which line of gcode to start the program (Grey Arrow)
Spindle Stop = Turn o spindle/router (Red Arrow)
Spindle CW = Turn on spindle/router (Green Arrow)
The empty box next to the Spindle CW is where you can enter your spindle speed. Type the
desired speed into the box and press enter (White Arrow)
Running G-Code
To Next Page
Loading...