Onkyo A-9377

19
Specifications
Rated output power
European (IEC): 2ch × 90 W at 4 Ω, 1 kHz, 2ch driven
Maximum output power (JEITA): 2ch × 132 W at 4 Ω, 1 kHz, 2ch driven
Dynamic power: 124 W + 124 W (4 Ω)
80 W + 80 W (8 Ω)
THD (total harmonic distortion): 0.08% (1 kHz, 1 W)
Damping factor: 60 (1 kHz, 8 Ω)
Input sensitivity and impedance: 200 mV, 45 kΩ (LINE)
2.5 mV, 45 kΩ (PHONO MM)
Output level and impedance: 150 mV, 2.2 kΩ (REC OUT)
Phono overload: 50 mV (MM, 1 kHz, 0.5%)
Frequency response: 10 Hz–100 kHz, +1 dB, –3 dB (CD)
Tone control: +10 dB, –8 dB, 100 Hz (BASS)
+9 dB, –8 dB, 10 kHz (TREBLE)
Signal to Noise ratio: 96 dB (CD, IHF-A)
70 dB (PHONO, IHF-A)
Speaker impedance: 4–16 Ω
Power supply: AC 230 V, 50 Hz
AC 120/220-240 V, 50/60 Hz
Power consumption: 286 W
Dimensions (W × H × D): 435 × 150 × 348 mm
17-1/8 × 5-7/8 × 13-11/16
Weight: 8.8 kg (19.4 lb.)
Analog inputs: PHONO, CD, TUNER, TAPE, LINE, DOCK
Analog outputs: TAPE, PREOUT
Speaker outputs: 2 (A, B)
Phones: 1
Specifications and features are subject to change without notice.
Block Diagram
PHONO
CD
TUNER
TAPE IN
TAPE OUT
LINE
DOCK
PRE-OUT
RI CONTROL
PHONO AMP
VOLUME and SELECTOR CONTROL
MUTE CONTROL
TONE/DIRECT CONTROL
R ch
L ch
Selector IC and
MAIN VOLUME
SELECTOR
INDICATOR
DIRECT
INDICATOR
MUTE
INDICATOR
SPEAKER A/B
INDICATOR
BALANCE
TONE/DIRECT
BASS
SPEAKERS
SPEAKERS A
SPEAKERS B
SPEAKERS A
SPEAKERS B
TREBLE
TONE AMP
POWER AMP
MUTE
DIRECT AMP