Onkyo DR-UN7 User Manual

47
Listening to the Radio—Continued
Positioning the XM Antenna
You can check the signal strength of the XM radio signal
and adjust the position of the XM antenna accordingly.
Note:
If the signal level is 0%, make sure that the XM antenna
is connected properly.
XM Radio Messages
The following messages may appear while using XM
radio.
The XM antenna is not connected properly. Check the
antenna.
The XM user encryption code is being updated. Please
wait.
The signal is too weak. Check the antenna connection
and reposition it for the best reception.
The DVD receiver is tuning or decoding audio or text
data. Please wait.
The XM channel you selected is not currently broadcast-
ing. Select another channel.
1
Press EDIT/NO/CLEAR with XM
redio selected.
2
Turn MULTI JOG to select
“Antenna Aim ?” and then press
MULTI JOG.
3
Adjust the position of the XM
antenna so that the signal
strength is at least 70%.
The signal level range is 0% to 100%.
1
2

Onkyo DR-UN7 Specifications

Power

power supply	AC 120 V, 60 Hz
power consumption	115 W
stand-by power consumption	0.2 W

Operating Environment

operating temperature	5 ˚C–35 ˚C
operating humidity	5 %–85 %
tuning frequency range	87.5 MHz–107.9 MHz

Audio Specifications

signal to noise ratio	100 dB (LINE, IHF-A)
frequency response	10 Hz–100 kHz/±3 dB (LINE)
total harmonic distortion	5 % (Power Rated)

Weight and Dimensions

dimensions	205 W x 147 H x 353 D mm
weight	5.4 kg