To Next PageTo Next Page
Need help?Do you have a question about the Onkyo HT-R791 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| Total Harmonic Distortion | 0.08% |
| HDMI Inputs | 6 |
| HDMI Outputs | 1 |
| Audio D/A Converter | 192 kHz / 24-bit |
| Tuner Presets | 40 |
| HDMI Switching | Yes |
| Video Conversion | Yes |
| Surround Sound | Yes |
| Amplifier Output Details | 8 ohms, 20 Hz - 20 kHz, 0.08% THD |
| Response Bandwidth | 5 Hz-100 kHz |
| Signal-To-Noise Ratio | 106 dB |
| Input Impedance | 47 k ohms |
| Input Sensitivity | 200 mV |
| Dimensions (W x H x D) | 435 x 154 x 380 mm |
Provides essential safety guidelines for operating the apparatus, including warnings about electrical shock and fire hazards.
States that recording copyrighted material without permission is illegal for anything other than personal use.
Informs that the AC fuse is not user-serviceable and advises contacting a dealer if the unit won't turn on.
Provides instructions on how to clean the unit, advising against abrasive cloths and chemical solvents.
Details warnings and instructions related to the power cord and plugging in the unit for the first time.
Warns about excessive sound pressure from headphones causing hearing loss.
Warns against exposing batteries to excessive heat like sunshine or fire.
Advises against handling the unit or its power cord with wet hands.
Provides notes on transporting the unit, avoiding plastic items on the case, and occasional use.
Provides FCC compliance information for U.S. models regarding radio frequency energy.
States compliance with Canadian ICES-003 for Class B digital apparatus.
Illustrates the process of installing batteries into the remote controller.
Explains how to properly aim the remote controller at the AV receiver's sensor.
Covers safety instructions, warnings, and precautions for using the AV receiver.
Provides essential safety guidelines for operating the apparatus.
Lists the items included with the AV receiver.
Identifies and explains the front and rear panel controls and connectors.
Explains the various indicators and icons shown on the AV receiver's display.
Details the functions of the remote controller and how to use it.
Provides instructions on connecting speakers, components, antennas, and power.
Guides through turning the receiver on/off and performing initial setup.
Covers advanced settings and configurations for audio, video, and system setup.
Explains how to use the remote to control other compatible devices.
Contains troubleshooting, connection tips, specifications, and legal notices.
Details the amplifier specifications, including power output and circuitry.
Describes the audio and video processing technologies used in the receiver.
Lists the available input and output connection ports for various components.
Highlights additional features like FM/AM presets, Audyssey functions, and A/V Sync.
Identifies and describes the controls and indicators on the front panel.
Explains the meaning of various indicators and icons shown on the AV receiver's display.
Identifies and describes the various input and output connectors on the rear panel.
Details how to operate the AV receiver using the remote controller's buttons.
Explains how to use the remote controller to operate the AV receiver's tuner.
Provides instructions on connecting speakers and configuring speaker setup.
Details speaker configuration and how to connect speaker cables.
Explains different AV connection formats like HDMI, Component, and Composite.
Guides on connecting components using HDMI, including ARC function.
Shows how to connect various components to the AV receiver's jacks.
Explains how to connect and control Onkyo RI-compatible components.
Details how to connect the supplied FM and AM antennas for radio reception.
Provides instructions on plugging the power cord into the AC wall outlet.
Explains how to turn the AV receiver on and off using the front panel or remote.
Guides through the initial setup wizard for essential configuration.
Details how to play audio/video from connected sources using the receiver.
Explains how to control playback of USB and network devices using the remote.
Describes icons that appear on the AV receiver's display during media playback.
Provides instructions on playing music and video files from an iPod/iPhone via USB.
Explains how to play music files from a USB device connected to the receiver.
Guides on accessing and listening to stations via the vTuner Internet Radio service.
Explains how to register internet radio URLs and customize the network service screen.
Details how to play music files stored on a computer or media server.
Explains how to play music files from a computer via remote playback.
Provides instructions on using the tuner to listen to AM and FM radio stations.
Explains how to store and select favorite AM/FM radio stations as presets.
Covers basic functions like automatic speaker setup and listening modes.
Guides through the Audyssey 2EQ Room Correction and Speaker Setup process.
Explains how to select and use various listening modes for different content types.
Describes how listening modes transform the audio experience.
Lists and describes Onkyo's proprietary DSP listening modes.
Details various listening modes, their input sources, and speaker layouts.
Provides quick access to frequently used menus like Network Service, USB, and Setup.
Explains how to set the AV receiver to turn off automatically after a specified period.
Shows how to display various information about the current input source.
Instructions on how to configure the input display for RIH-D compatibility.
Explains how the Music Optimizer enhances sound quality for compressed music.
Instructions on how to temporarily mute the AV receiver's output.
Details how to connect and use stereo headphones with the receiver.
Guides on changing settings using Quick Setup or the Setup Menu (HOME).
Provides quick access to frequently used settings for easy configuration.
Explains how to navigate the Setup menu organized into 9 categories.
Covers selecting input sources and viewing related information.
Details audio settings like Bass, Treble, Audyssey, and volume controls.
Explains video settings such as Wide Mode and Picture Mode.
Allows viewing of information related to audio, video, and tuner settings.
Covers selecting listening modes grouped by categories like MOVIE/TV, MUSIC, GAME.
Details how to change various audio settings like Tone Control and Speaker Levels.
Allows adjustment of Bass and Treble for the front speakers.
Explains how to adjust individual speaker volume levels.
References Audyssey settings within Source Setup for room correction.
References Dynamic EQ settings within Source Setup for loudness correction.
References Dynamic Volume settings within Source Setup for volume variation.
Reduces dynamic range for clearer listening at low volumes.
Enhances sound quality of compressed music files.
Softens overly bright movie soundtracks for a better theater experience.
Explains navigation of the HOME setup menu and its various categories.
Sets the time delay before the screen saver automatically activates.
Explains the conditions under which the HYBRID STANDBY indicator lights up.
Lists the main menu items for configuration, including Input/Output Assign and Speaker Setup.
Covers hardware-related settings like Tuner and Auto Standby.
Details setup options for the remote controller, including Remote ID and Mode.
Allows protection of settings by locking the setup menus.
Allows assignment of input sources and configuration of output resolution.
Sets the output resolution for HDMI OUT, including 4K upscaling.
Explains how to assign video components to HDMI inputs and default assignments.
Details assigning component video inputs to input selectors.
Explains assigning digital audio inputs to input selectors.
Covers manual speaker setup and configuration options.
Allows checking and manually setting speaker parameters.
Specifies connected speakers and crossover frequencies for each.
Boosts bass output by feeding bass sounds to the subwoofer.
Specifies the distance from each speaker to the listening position.
Adjusts speaker levels using a test tone for balanced volume.
Allows adjustment of sound and listening modes.
Determines which audio channel or source to output for multiplex or mono sources.
Details Dolby listening modes like PL IIx Music, PL IIz Height Gain, and Dolby EX.
Specifies whether to apply Late Night processing to Dolby TrueHD sources.
Details DTS listening modes like Neo:6 Music and Theater-Dimensional.
Allows setting parameters for each input selector, including Audyssey.
Enables Audyssey settings after performing room correction.
Adjusts frequency response and surround levels based on volume.
Allows setting volume offsets for content with wide dynamic range.
Solves large volume variations between programs and passages.
Sets input level for each selector individually for volume balance.
Corrects audio/video sync issues by delaying audio signals.
Allows entering custom names for input selectors and radio presets.
Adjusts picture quality and reduces noise.
Determines the aspect ratio for the picture display.
Allows manual setting of various picture parameters like Cinema or Game.
Reduces video signal delay during playback for game consoles.
Automatically converts input signals to appropriate progressive signals.
Sharpens the picture by adjusting edge detail.
Reduces noise appearing on the screen.
Adjusts the picture brightness from darkest to brightest.
Adjusts the picture contrast from least to greatest.
Adjusts the color hue between the minimum and maximum settings.
Adjusts the color saturation from weakest to strongest.
Allows adjustment of the color temperature (Warm, Normal, Cool).
Sets priorities for audio input signals like ARC, HDMI, Coaxial, and Optical.
Manually specifies the incoming digital signal format (PCM, DTS).
Assigns a default listening mode to each input source.
Covers miscellaneous settings like Volume Setup and OSD Setup.
Allows setting Maximum Volume, Power On Volume, and Headphone Level.
Configures On Screen Display, Language, and Screen Saver settings.
Covers hardware settings including Tuner frequency step.
Details setup options for the remote controller, including Remote ID and Lock Setup.
Protects settings by locking the setup menus.
Explains how to set up and use Zone 2 for multi-room audio playback.
Details two methods for connecting Zone 2 speakers.
Guides on operating and muting Zone 2 audio playback.
Explains how to control an iPod/iPhone connected via the RI Dock.
Explains how to enter remote control codes to operate other AV components.
Provides a method to look up appropriate remote control codes via the on-screen menu.
Details the procedure for entering a 5-digit remote control code for a component.
Allows changing the configuration of colored buttons for remote control.
Details remote control operations for Blu-ray, HD DVD, and DVD recorders.
Provides solutions for common issues and problems encountered.
Troubleshooting steps for issues related to power and unexpected turn-offs.
Troubleshooting for issues related to sound output, volume, and speaker connections.
Troubleshooting steps for issues related to picture display and input signals.
Troubleshooting for issues related to radio reception and FM stereo.
Troubleshooting steps for issues with the remote controller not working.
Troubleshooting for issues controlling other connected components.
Troubleshooting for issues with the RI Dock and iPod/iPhone.
Troubleshooting steps for network connectivity and server access issues.
Troubleshooting steps for connecting to the receiver via a web browser.
Troubleshooting steps for accessing music files from a USB device.
Provides methods for updating the AV receiver's firmware via network or USB.
Instructions for updating firmware using a wired internet connection.
Instructions for updating firmware using a USB storage device.
Step-by-step guide for performing the firmware update process.
Lists error codes and solutions for network firmware updates.
Offers guidance on connection formats and signal flow for AV equipment.
Explains composite, component, and HDMI video connection formats.
Describes signal selection priority when multiple inputs are present.
Details audio connection formats: analog, optical, coaxial, and HDMI.
Shows how video signals at different resolutions are output by the AV receiver.
Explains how to use RIHD for system control over HDMI.
Provides an overview of HDMI technology and its features.
Lists the audio formats supported by HDMI connections.
Explains HDCP copy-protection for digital video signals.
Covers network and USB features, including connectivity and requirements.
Illustrates how to connect the AV receiver to a home network.
Details network requirements for optimal performance, including router settings.
Lists requirements for server playback, including software and device compatibility.
Lists the audio file formats supported by the AV receiver for playback.
Explains the Digital Living Network Alliance and DLNA compliance.
Provides information on licenses, trademarks, and patents.
Lists the technical specifications of the AV receiver and speaker package.
Details the electrical specifications of the AV receiver's amplifier section.
Lists the technical specifications related to video input and output.
Provides the technical specifications for the FM and AM tuner.
Lists general specifications such as power supply, consumption, and dimensions.
Details HDMI connection specifications, including supported formats.
Lists the types and assignments of video input connectors.
Lists the types of video output connectors.
Lists the types of audio input connectors.
Lists the types of audio output connectors.
Lists other components and features like Setup Mic, RI, USB, and Ethernet.
Lists all the accessories included with the speaker package.
Provides guidance on optimal speaker placement for an immersive home theater experience.
Offers crucial precautions before connecting speakers to prevent damage.
Details the technical specifications for each speaker component.
Explains common steps for accessing and using internet radio services.
Describes how to manage multiple user accounts for internet radio services.
Guides through setting up and using Pandora internet radio.
Provides instructions for signing up and using the Rhapsody music service.
Guides on signing up and using the SiriusXM Internet Radio service.
Details how to use Last.fm for personalized radio stations and music discovery.
Explains how to use Slacker Personal Radio for personalized music streams.
Guides on creating an account and playing music from MP3tunes.
Explains how to assign remote control codes to the REMOTE MODE buttons.
Provides important notes regarding remote control code entry and compatibility.
Italian instructions for entering remote control codes.
Spanish instructions for entering remote control codes.
German instructions for entering remote control codes.
Dutch instructions for entering remote control codes.
Swedish instructions for entering remote control codes.
