To Next PageTo Next Page
Need help?Do you have a question about the Onkyo HT-RC160 and is the answer not in the manual?
Crucial safety guidelines to prevent hazards and ensure proper operation.
Setup, aiming, and operation of the remote control for the AV receiver.
Explains how to use the remote to operate the AV receiver and other components.
Instructions for connecting various speaker configurations for optimal surround sound.
Detailed steps for properly connecting speaker wires to terminals.
Information on HDMI interface, supported formats, and its advantages.
How to power the unit on, enter standby mode, and basic power management.
Guided process for configuring the AV receiver for initial use, including audio and video settings.
Instructions on navigating and using the AV receiver's setup menus via a connected display.
Configuring speaker types, crossover frequencies, and other audio parameters.
Automatic room acoustics calibration for optimal speaker performance.
How to choose and switch between different connected audio/video components.
Methods for choosing desired listening modes via the receiver or remote.
Overview of the menu structure for accessing all receiver settings.
Fine-tuning speaker configuration, distances, levels, and crossovers.
Defining speaker types, sizes, and crossover frequencies for optimal audio.
Adjusting audio settings like channel levels, tone controls, and special sound processing.
Addresses issues related to the AV receiver not turning on or shutting off unexpectedly.
Solutions for problems with sound output, including no sound or low volume.
Guide on how to connect the speaker cables to the AV receiver and speakers.
Critical safety warnings for the iPod dock and its usage.
General
