Onkyo R-811RDS - Setting the Time and Day; Setting the Clock; Setting the Day

Setting the time and day
2,4
CD) © evo
lopms=s0000 |
LS oe
1. Press the CLOCK ADJUST button
twice quickly within a half of second.
CLOCK
ADJUST
-
2.
Set
the
time.
When the button is pressed down for
more than 0.5 second, the numbers will
quickly change. After pressing the but-
ton again to stop the clock from chang-
2
ing,
adjust
the
clock
by
pressing
the
button once to change the time by one
minute.
3. Enter the time.
4, Set the day.
5. Enter the day.
The clock starts to work.
You can set the time accurately from
the TV or radio news.
To find out the time while a unit of equip-
ment is playing, press the CLOCK
ADJUST button. Press the button once
again to return to the original display.
When the unit is in standby mode, the day
can be turned on or off with the CLOCK
ADJUST button.
If there is a power failure or the rear power
switch is turned off, the clock must be set
again.
“@@ TUNING/PRESET D>
MEMORY .-
(—
12