To Next PageTo Next Page
Need help?Do you have a question about the Onkyo R-811RDS and is the answer not in the manual?
Power| power_output_at_4_ohms | 2 x 50 watts |
|---|---|
| power_output_at_8_ohms | 2 x 35 watts |
| continuous_power_output | 32 watts per channel at 8 ohms |
| dynamic_power_output_at_4_ohms | 2 x 70 watts |
| dynamic_power_output_at_8_ohms | 2 x 40 watts |
| total_harmonic_distortion_at_rated_power | 0.2% |
| im_distortion_at_rated_output | 0.1% |
| damping_factor | 40 at 8 ohms |
Frequency Response| frequency_response | 20Hz to 30 kHz + 1 dB |
|---|---|
| riaa_deviation | 20Hz to 20 kHz + 0.8 dB |
Sensitivity and Impedance| phono_sensitivity_and_impedance | 2.5 mV/50 kohms |
|---|---|
| cd_tape_play_sensitivity_and_impedance | 150 mV/50 kohms |
| tape_rec_sensitivity_and_impedance | 150 mV/2.2 kohms |
Signal-to-Noise Ratio| phono_signal_to_noise_ratio | 80 dB (HF A, 5 mV input) |
|---|---|
| cd_tape_signal_to_noise_ratio | 100 dB (IHF A) |
Tuner Section| fm_tuning_range_european_models | 87.50-108.00 MHz (50 kHz steps) |
|---|---|
| fm_tuning_range_worldwide_models | 87.50-108.00 MHz (50 kHz steps), 87.9-107.9 MHz (200 kHz steps) |
| am_tuning_range_european_models | 522-1611 kHz (9 kHz steps) |
| am_tuning_range_worldwide_models | 531-1602 kHz (9 kHz steps), 530-1710 kHz (10 kHz steps) |
Usable Sensitivity| fm_mono_usable_sensitivity | 11.2 dBf, 1.0uV, 75 Ohms IHF |
|---|---|
| fm_stereo_usable_sensitivity | 17.2 dBf, 2.0V, 75 Ohms IHF |
| am_usable_sensitivity | 25uV |
General| power_supply_european_models_except_uk | AC230V, 50 Hz |
|---|---|
| power_supply_canadian_models | AC120 V, 60 Hz |
| power_supply_uk_australian_models | AC240 V, 50 Hz |
| power_supply_worldwide_models | AC120 V and 220 V switchable, 50/60 Hz |
| dimensions | 275 x 118 x 336 mm (10-7/8" x 4-11/16" x 13-7/32") |
| weight | 5.5 kg, 12.1 lbs |
Highlights the advanced components and technology contributing to superior audio output.
Explains how RDS provides station and programming data on FM broadcasts.
Details the timer functions for playing or recording, including daily and sleep timer options.
Describes the remote control's ability to operate the unit and other compatible Onkyo components.
Explains the unit's backup system that preserves memory during power outages.
Comprehensive list of safety precautions for operating the appliance to prevent hazards.
Guidance on warranty, unit care, power connection, and voltage selection for worldwide models.
Identifies and describes all buttons, knobs, and indicators on the front panel of the unit.
Instructions on how to set the voltage selector to match the local power supply.
Guidance on setting the AM and FM tuning step frequencies for different regions.
Details the buttons on the remote and their corresponding operations on the unit.
Information on the correct type of batteries and precautions for their use in the remote control.
Tips and considerations for effective and interference-free operation of the remote control.
Instructions for connecting a turntable to the PHONO input jacks, including grounding.
Guidance on connecting a CD player to the CD input jacks for audio playback.
How to connect various audio components like tuners, VCRs, or other players to LINE inputs.
Instructions for connecting one or two tape decks to the TAPE-1 and TAPE-2 jacks.
Details on connecting an audio processor like an equalizer to the PROCESSOR jacks.
Information on connecting the MONO OUT jack to a subwoofer or subwoofer amplifier.
Guide on connecting speaker systems to the unit, including impedance and wiring considerations.
Explains the function and capacity of the switched and unswitched AC outlets on the rear panel.
Steps for assembling the AM loop antenna and connecting it for indoor use.
Recommendations for using an external antenna for improved AM reception.
Guidance on connecting the T-shaped FM antenna for indoor use and placement.
Advice on connecting an external FM antenna and considerations for optimal placement.
Procedure for connecting a 75/300 ohm antenna adapter for coaxial cable.
Step-by-step instructions for plugging in and powering on the unit.
Detailed steps for setting the current time on the unit's clock display.
Instructions on how to set the current day of the week for the clock.
Steps for turning on the unit and choosing an audio source using the input selector.
How to select speakers for listening and adjust the volume level.
Guidance on using balance and tone controls (bass, treble, super bass) for sound customization.
How to use the MUTING button on the remote control to silence the audio output.
Instructions for connecting and using headphones with the unit.
How to monitor the audio being recorded on a connected tape deck.
Steps for manually tuning into AM and FM radio stations using the tuning controls.
How to store favorite radio stations into the preset memory slots.
Tips for tuning in and listening to stereo FM broadcasts, including mono selection.
How to recall and listen to radio stations stored in the preset memory.
Procedure for clearing stored radio stations from the preset memory.
Guide to inputting custom characters for station names using the front panel controls.
Steps to modify or edit characters of already stored station names.
How to erase all custom characters and station name entries from memory.
Explanation of RDS services like PS, PTY, TP, and RT for enhanced FM reception.
List of Program Type (PTY) codes used for categorizing FM radio broadcasts.
How to search for radio stations based on their program type category.
Steps to find and receive traffic information broadcasts using the TP function.
How to view text-based information broadcast by RDS stations.
Instructions for recording audio from a CD to a tape deck.
Guide on dubbing audio from one tape deck to another.
Explains how to connect Onkyo components using RI cables for integrated remote control.
Lists the remote control buttons for operating a connected Onkyo CD player.
Lists the remote control buttons for operating a connected Onkyo tape deck.
Describes various timer functions like Play (once/weekday/weekend) and Record.
Explains the process of one-touch recording from a CD to a cassette deck.
Details advanced dubbing modes like Fadeout and Album dubbing for cassette recording.
How to set the sleep timer to automatically turn off the unit after a specified period.
Method for deactivating the sleep timer function.
How to review programmed timer settings for playback or recording.
Step-by-step guide to program timer settings for automatic playback or recording.
How to choose the audio source and finalize timer programming for the unit.
Procedure to modify the days included in the WEEKDAY timer settings (Mon-Fri).
Procedure to modify the days included in the WEEKEND timer settings (Sat-Sun).
Solutions for problems like no sound, hum, poor reception, or RDS errors.
Technical details and performance metrics for the amplifier and tuner sections.
Information on power supply, dimensions, and weight of the unit.
