Onkyo R-811RDS - Speaker and AC Outlet Connections; Connecting Speakers; AC Outlets Description

Making
system
connections
Please
refer
to
the
instruction
manual
of
each
component
when
making
any
connections.
The SWITCHED outlet is switched on and off
by the power buttons on the front panel and
remote control, with a capacity of 100 watts.
UNSWITCHED
100W MAX.
5° a
©6660606000
-©000000
00 g
The Power buttons on the front panel and
remote control do not affect the power sup-
ply to the UNSWITCHED socket. The shape
of the socket varies according to the region.
The capacity is 100 watts.
wacr O ce
as
SWITRHED
100W MAX.
Two separate pairs of speaker systems can
be connected to this unit at once.
Please connect each speaker according to
the illustration, observing the correct con-
nections for R, L, + and -.
e@ The load impedance of each speaker
system connected to this unit must be at
least 4 ohms. (If using only A or only B,
4 ohms min.; if A and B, 8 ohms min.)
e Do not use unnecessarily long or
extremely thin speaker leads. If the DC
resistance of the speaker leads is too
high, the damping factor will decrease,
ae
adversely
affecting
the
sound
quality.
faseetwm
Retin]
|
|
@
When
using
only
one
speaker
or
when
you
wish
to
listen
to
monaural
(mono),
.
the
single
speaker
should
never
be
con-
nected
in
parallel
to
both
the
right
and
left
channel
terminals
at
once.
e When using banana plugs, make sure
the speaker terminal screws are screwed
in firmly before inserting the banana
plugs.