as an AM radio station or mono TV program, the sound is concentrated in
the center speaker.
Make sure the speakers are configured correctly.
The surround speakers produce no sound
When the T-D (Theater-Dimensional), Stereo or Mono listening mode is
selected, the surround speakers produce no sound.
Depending on the source and current listening mode, not much sound
may be produced by the surround speakers. Try selecting another
listening mode.
Make sure the speakers are configured correctly.
The center speaker produces no sound
When the Stereo or Mono listening mode is selected, the center speaker
produces no sound.
Make sure the speakers are configured correctly.
The subwoofer produces no sound
When you play source material that contains no information in the LFE
channel, the subwoofer produces no sound.
Make sure the speakers are configured correctly.
There is no sound with a certain signal format
When listening to Dolby Digital and/or DTS sound, digital connection is
necessary.
Check the digital input terminal setting. If the connection is different from
the default, re-setting is necessary.
Check the digital audio output setting on the connected component. On
some game consoles, such as those that support DVD, the default setting
is off.
Cannot select the Pure Audio listening mode
The Pure Audio listening mode cannot be selected while Zone 2/Zone 3 is
on.
Cannot select a desired listening mode
Depending on the connecting status of the speaker, some listening
modes may not be selected. Check the details in "Using the Listening
Modes" section.
Cannot play 5.1ch
Make sure the speakers are configured correctly.
Not all listening modes use all speakers.
Cannot get 6.1/7.1 playback
6.1/7.1 playback is not possible if surround back speakers and height
speakers are not connected.
Depending on the number of connected speakers, it is not always
To Next Page
Loading...
