Supported Audio Formats
For server playback and playback from a USB storage device, this unit
supports the following music file formats.
Music files of the following formats that can be played depend on the
network server. For example, when using Windows Media Player 12, not
all music files in the PC can be played. The music files that can be played
are the ones registered to the Windows Media Player 12 library.
Variable bit-rate (VBR) files are supported. However, playback times may
not be displayed correctly.
This unit supports the gapless playback of the USB storage device in the
following conditions.
When WAV, FLAC and Apple Lossless files are continuously played back
with the same format, sampling frequency, channels and quantization bit
rate.
Remote playback does not support the gapless playback.
Note:
With remote playback, this unit does not support the following music file
formats:
– FLAC, Ogg Vorbis, DSD and Dolby TrueHD.
MP3 (.mp3 or .MP3)
Supported formats: MPEG-1/MPEG-2 Audio Layer 3
Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz,
24 kHz, 32 kHz, 44.1 kHz, 48 kHz
Supported bitrates: Between 8 kbps and 320 kbps and VBR.
WMA (.wma or .WMA)
WMA stands for Windows Media Audio and is an audio compression
technology developed by Microsoft Corporation. Audio can be encoded in
WMA format by using Windows Media® Player.
WMA files must have the copyright option turned off.
Supported sampling rates: 8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz, 32 kHz,
44.1 kHz, 48 kHz
Supported bitrates: Between 5 kbps and 320 kbps and VBR.
WMA Pro/Voice formats are not supported.
WMA Lossless (.wma or .WMA)
Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Quantization bit: 16 bit, 24 bit
To Next Page
Loading...
