5.Listening Mode Preset
You can preset your favorite listening mode to each input. (For example, you
can always apply straight decode to the Dolby TrueHD source of Blu-ray
Disc to play it in unchanged sound field.)
Select the input, signal type and listening mode.
Although it is possible to select the listening mode during playback, the
selected mode will be reset when the unit enters standby mode.
Analog/PCM
Default Value: Last Valid
Set the listening mode for playing PCM signals of CD and analog
signals of record and cassette tape.
Mono/
Multiplex Source
Default Value: Last Valid
Set the listening mode for playing Dolby Digital, AAC and other digital
signals recorded in monaural or multiplex audio.
2ch Source
Default Value: Last Valid
Set the listening mode for playing Dolby Digital and other digital signals
recorded in 2 channels.
Dolby D/
Dolby D Plus/TrueHD
Default Value: Last Valid
Set the listening mode for playing Dolby Digital, Dolby Digital Plus and
Dolby TrueHD signals.
To Next Page
Loading...
