2.Speaker Setup
Allows you to change the speaker configuration such as presence or not of
subwoofer, crossover frequency, and so on. Settings are automatically
configured if you use the Automatic Speaker Setup.
Furthermore, this setting cannot be selected if headphones are connected or
audio is output from the speakers of the TV.
Speaker Settings
Change the impedance of the connected speakers, the type of front speaker
connection, and other speaker settings.
Speaker Impedance
Default Value: 6ohms
Set the impedance of the connected speakers.
"4ohms": When any of the connected speakers have 4 Ω or more to less
than 6 Ω impedance
"6ohms": When the connected speakers all have 6 Ω or more
impedance
Front Speakers Type
Default Value: Normal
Select the type of front speaker connection.
"Normal": When front speakers are connected in a normal manner
"Bi-Amp": When front speakers are bi-amp connected
Powered Zone 2
Default Value: No
Set presence of speaker terminal connection of Zone 2
"Yes": When speakers are connected to ZONE 2 speaker terminals
"No": When speakers are not connected to ZONE 2 speaker terminals
If "Front Speakers Type" is set to "Bi-Amp", this setting will be set to
"No".
For impedance, check the indications on the back of the speakers or their
To Next Page
Loading...
Need help?
General
