3.Audio Adjust
Configure various settings related to sound, such as settings for listening to
multiplex audio or multilingual TV broadcasts and sound field settings for
listening modes.
Multiplex/Mono
Multiplex
Input Channel
Default Value: Main
Set the audio channel or language to be output when playing multiplex
audio or multilingual TV broadcasts etc.
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels will be output at the same time.
If multiplex audio is being played, "1+1" will be displayed when
Display on the main unit is pressed.
Mono
Input Channel
Default Value: Left+Right
Set the input channel to use for playing any 2 ch digital source such as
Dolby Digital, or 2-ch analog/PCM source in the Mono listening mode.
"Left": Left channel only
"Right": Right channel only
"Left+Right": Left and right channels
Mono
Output Speaker
Default Value: Center
Select the speaker to output monaural audio in the Mono listening
mode.
"Center": Audio is output from the center speaker.
"Left/Right": Audio is output from the front L/R speakers.
To Next Page
Loading...
