The setting cannot be changed if "Center" is set to "None" in
"Speaker Configuration".
Dolby
Make the settings for Dolby listening mode.
PLIIx Music (2ch Input)
Panorama
Default Value: Off
Adjust the sound field setting for playing any 2 ch digital source such as
Dolby Digital or 2 ch analog/PCM source in the Dolby PrologicII Music
listening mode. Select the width of sound field.
"On": Width of sound field will be increased.
"Off": Default value
PLIIx Music (2ch Input)
Dimension
Default Value: 0
Adjust the sound field setting for playing any 2 ch digital source such as
Dolby Digital or 2 ch analog/PCM source in the Dolby PrologicII Music
listening mode. Select the depth of sound field.
"-3" to "+3": The sound field shifts forward as the set value becomes
smaller than "0" and backward if the set value become larger than "0".
PLIIx Music (2ch Input)
Center Width
Default Value: 3
Configure the setting to use for playing any 2 ch digital source such as
Dolby Digital, or 2-ch analog/PCM source in the Dolby PrologicII Music
listening mode. Adjust the width of the sound from the center speaker).
"0" to "7": The smaller the setting value is, the more concentrated in the
center speaker is the sound, while the larger the setting value is, the
more distributed to the front left and right speakers is the sound of the
center speaker.
PLIIz Height Gain
Default Value: Mid
Adjust the output level of the height speakers in the Dolby Pro Logic IIz
To Next Page
Loading...
