1.Input/Output Assign
Monitor Out
The video input signals input to the unit will be converted when they are
output from the HDMI OUT jack to the TV so that their resolution can match
that of the TV used.
Monitor Out
Default Value: MAIN
Select the jack to be used for HDMI output.
"MAIN": When connecting the TV to the HDMI OUT MAIN jack
"SUB": When connecting the TV to the HDMI OUT SUB jack
The resolution of the input signal does not change when output
through HDMI OUT SUB jack.
"MAIN+SUB": When connecting to both the MAIN and SUB jacks
Video signals input to the composite video input jack or the
COMPONENT VIDEO input jacks will be upconverted to HDMI
signals and then output from the HDMI output jack.
If "MAIN+SUB" is selected
– Only "Through" or "Auto" can be selected in "Resolution".
– The resolution of the input signal does not change when output
through HDMI OUT SUB jack.
HDCP2.2 protected video from HDMI OUT SUB will not be
displayed.
Zone 2 Monitor Out
Default Value: Not Use
This is the setting to output to TV of Zone 2 which is connected to the
HDMI OUT ZONE2 jack.
"Use": Enable this function
"Not Use": Disable this function
The setting is set to "Not Use" if "Monitor Out" is set to "SUB" or
"MAIN+SUB".
Resolution
Default Value: Through
To Next Page
Loading...
Need help?
General
