Specify the output resolution of the HDMI OUT jacks. The image
resolution of the unit will be converted so that it can match the
resolution supported by the TV used.
"Through": The output resolution will be the same as that of the input
signals.
"Auto": The resolution will automatically be converted according to
the resolution supported by the TV.
"480p (480p/576p)", "720p", "1680×720p", "1080i", "1080p",
"2560×1080p": Select the desired resolution.
"4K": About four times as high resolution as 1080p (3840×2160 or
4096×2160 pixels depending on the resolution supported by the
connected TV)
If "1080p" is selected, 1080p/24 input signals will be output with
an unchanged resolution.
If the selected resolution is not supported by the monitor, the
video is displayed in the same resolution as the input signal.
If "4K" is selected, video signals may not be output to some types
of TV. For details, see "Regarding the Video Resolution" in
"Troubleshooting".
If "Monitor Out" is set to "SUB", this setting will be set to
"Through".
Press ENTER if you output signals from the HDMI OUT MAIN jack
and check the video on the TV while making this setting. Press
RETURN if no video is displayed. (except when "NET", "USB" or
"BLUETOOTH" is selected)
For THX playback, selecting the HDMI output and setting the
resolution to "Through" is recommended for the best image
quality.
HDMI Input
It is possible to change assignment of input selector buttons and the HDMI IN
jacks.
BD/DVD
Default Value: HDMI 1
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to
BD/DVD button. If you do not assign a jack, select "-----". To select an
HDMI IN jack already assigned to another input selector, change its
setting to "-----" first.
CBL/SAT
Default Value: HDMI 2
To Next Page
Loading...
