In the following cases, the settings for "Picture Adjust" cannot be
changed:
– "NET", "USB" or "BLUETOOTH" is selected.
– "Monitor Out" is set to "SUB".
Press CLR on the remote controller if you return all the settings from
"Game Mode" through "Color Temperature" to their default value.
Audio Selector
Make the audio input setting. The setting can be separately set to each input
selector button. Select the input selector to configure.
Audio Selector
Default Value: –
Allows you to select prior input source.
"ARC": When giving priority to input signal from ARC compatible TV.
The setting can be selected only when "Audio Return Channel" is set
to "Auto" and also the "TV/CD" input is selected.
"HDMI": When giving priority to input signal from HDMI jacks
The setting can be selected only when the input is assigned to the
HDMI IN jack in the "HDMI Input" setting.
"COAXIAL (Coaxial input)": When giving priority to input signal from
DIGITAL IN COAXIAL jacks.
The setting can be selected only when the input is assigned to the
COAXIAL jack in the "Digital Audio Input" setting.
"OPTICAL (Optical input)": When giving priority to input signal from
DIGITAL IN OPTICAL jacks.
The setting can be selected only when the input is assigned to the
OPTICAL jack in the "Digital Audio Input" setting.
"Analog": To always output analog audio independently of the input
signal
Fixed Mode
Default Value: Off
Specify an input signal when "HDMI", "COAXIAL (Coaxial input)", or
"OPTICAL (Optical input)" is selected for "Audio Selector". Set this
item if noise is produced, or truncation occurs at the beginning of a
track that follows a gap when playing PCM or DTS sources.
"Off": To play an analog signal when there is no digital signal.
"PCM": To fix the input source to PCM.
"DTS": To fix the input source to DTS (except for DTS-HD).
Changing "Audio Selector" changes the setting to "Off".
To Next Page
Loading...
