Onkyo TX-RZ3100 - Page 27

"On":Usethisfunction
"Off":Donotusethisfunction
3.DTS
DTSAutoSurround
DefaultValue:On
WheninputtingDTSsignalsthatincludeextendedchannelinformation,the
optimumlisteningmodeisautomaticallyselectedaccordingtotheextended
informationcontainedintheinputsignalandthespeakerconfigurationofthis
unitwhenplayinginthestraightdecodinglisteningmode.
"On":Usethisfunction
"Off":Audioisplayedusingthesameamountofchannelsintheinputsignal
accordingtothespeakerconfigurationofthisunit.
TheESMatrixandESDiscretelisteningmodescannotbeselectedifthis
functionissetto"Off".
4.LFELevel
Setthelowfrequencyeffect(LFE)levelforDolbyDigitalseries,DTSseries,
MultichannelPCM,andDSDsignals.
LFELevel
DefaultValue:0dB
Selectthelowfrequencyeffect(LFE)levelofeachtypeofsignalfrom"0dB"
to"－∞dB".Ifthelowfrequencyeffectsoundistoostrong,select
"－20dB"or"－∞dB".
5.Volume
VolumeDisplay
DefaultValue:Absolute
Switchthevolumedisplaybetweentheabsolutevalueandrelativevalue.
Theabsolutevalue82.0isequivalenttotherelativevalue0.0dB.
"Absolute":Absolutevaluesuchas"0.5"and"99.5"
"Relative":Relativevaluesuchas"81.5dB"and"+18.0dB"
Iftheabsolutevalueissetto82.0,"82.0Ref"willappearonthedisplay.
MuteLevel
DefaultValue:－∞dB
Setthevolumeloweredfromthelisteningvolumewhenmutingison.Select
avaluefrom"－∞dB",
"－40dB",and"－20dB".
MaximumVolume
DefaultValue:Off