Onkyo TX-RZ70 - Connecting a Power Amplifier

7.1.2ch
7.1ch
5.1.2ch
5.1.4ch
7.1.4ch
5.1ch
61
Speaker Connections
Connecting a Power Amplier
You can connect a power amplier to the unit and use the unit as a pre-amplier.
Use an analog audio cable for connection.
• Also make sure you read the instruction manual supplied with the connected
power amplier.
• For details on how to connect the speakers and the power amplier, refer to
the instruction manual of the power amplier.
Setup
• Set "Speaker" - "Conguration" - "Speaker Channels" ( →p133) according to
the number of channels of the connected speakers.
a Analog audio cable
a
Power amplier