82
Playback
Switching the display
Repeatedly pressing the button on the remote controller switches the display
of the main unit in the following order.
• The content displayed depends on the source, BLUETOOTH, etc., being
played.
• Depending on the audio signal, "B(Back)" or "W (Wide)" is displayed next to
the number of channels of the input format.
• Not all the information is necessarily displayed.
DTS Neural : X
1 9 2 1 6 8 X X X X
DTS-HDMSTR 5 . 1
10 8 0 p /5 9 1 6 : 9
BD/DVD 4 0 . 0
17 6 . 4 k H z
Input source and volume
Listening mode
IP Address
Input format
The display is switched in
a few seconds.
Sampling frequency
Input signal resolution
To Next Page
Loading...
