Onkyo TX-RZ70 - WHOLE HOUSE MODE

112
Playback
WHOLE HOUSE MODE
When the WHOLE HOUSE MODE button of the main unit is pressed during
playback in the main room, "Z2" and "Z3" on the display light up at the same
time, and the WHOLE HOUSE MODE function is turned on with which the same
source is played back at once in all rooms.
• Sources that can be played in ZONE 2 can be played in all rooms.
• In the following cases, this function cannot be used.
– When headphones are connected
– When audio is output from the speakers of the TV
– When "Speaker" - "Conguration" - "Zone 2 Preout" on the Setup menu is
set to "Zone B" ( →p134)
• Depending on the setting of "Speaker" - "Conguration" ( →p133) in the
Setup menu, it may not be able to output to ZONE 3.