Onkyo TX-RZ70 - Quick Menu

91
Playback
You can quickly set convenient features such as adjusting sound quality.
Quick Menu
HDMI
Audio
Room EQ
Level
Discrete Audio Path Mode
HDMI Out
A/V Sync
Audio Return Channel
BD/DVD
You can make the settings on the TV screen during playback. Press Q on the
remote controller to display the Quick Menu.
Select the item with the cursors / of the remote controller, and press the
ENTER button to conrm your selection.
Use the cursors to change the settings.
• To return to the previous screen, press .
• To exit the settings, press Q.
Note
• When the input signals are ones that need a high bandwidth, such as 8K
signals, the Quick Menu may not be displayed.
 HDMI
Discrete Audio Path Mode: You can make the HDMI IN 1 jack exclusively for
audio to improve sound quality. Not that when this is set to on, the output of
video signals will stop and there will be no display on the TV screen.
• The display will appear on the TV screen when you press , but the video
signal out is stopped again when you press again.
HDMI Out: Select the HDMI OUT jack to output video signals from "MAIN",
"SUB", and "MAIN+SUB".
A/V Sync: If the video is behind the audio, you can delay the audio to o󰀨set the
gap. The setting can be set for each input.
• It cannot be set if the listening mode is Pure Audio or Direct.
Audio Return Channel: You can enjoy the sound of the HDMI-connected ARC-
compatible TV through the speakers connected to the unit. Select "On" when
listening to the audio of TV using the speakers of this unit. Select "O󰀨" when the
ARC function is not used.
Quick Menu