To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-SR674/674E and is the answer not in the manual?
General| Audio Channels | 7.1 |
|---|---|
| Total Harmonic Distortion | 0.08 % |
| Signal-To-Noise Ratio | 106 dB |
| Input Sensitivity | 200 mV |
| Audio D/A Converter | 192kHz/24-bit |
| Digital Sound Processor (DSP) | Yes |
| Tuner Bands | AM/FM |
| Preset Station Qty | 40 |
| HDMI Switching | Yes |
| Frequency Response | 10 Hz - 100 kHz |
| Outputs | HDMI |
| Weight | 12.8 kg |
| Response Bandwidth | 10 Hz - 100 kHz |
| Input Impedance | 47 kOhm |
| Connectivity | digital optical, digital coaxial, analog |
| Video Inputs/Outputs | Component video, composite video, S-Video |
| Audio Inputs/Outputs | 7.1 channel audio line-in |
| Dimensions (W x H x D) | 435 x 174 x 377 mm |
| Power Output (per channel) | 100 W (8 ohms, 20 Hz - 20 kHz, 0.08% THD) |
User compliance and interference information for US models.
Notes for Canadian models and polarized plugs.
Details the layout and functions of the AV receiver's front panel controls.
Explains the various indicators and information shown on the AV receiver's display.
Details the rear panel connectors for various audio and video inputs/outputs.
Step-by-step guide to insert batteries into the remote control.
Guidance on pointing the remote at the receiver's sensor for effective control.
Explains how to use the remote controller to operate various components.
Details the controls for receiver and tape deck operation.
Lists and explains buttons for controlling the tuner via remote.
Lists and explains buttons for controlling cassette decks via remote.
Details the remote control buttons for operating a DVD player.
Explains remote control buttons for CD, MD, CDR, and HDD components.
Describes the function and optimal placement of speakers in a home theater setup.
General advice and precautions before making AV connections.
Instructions for connecting speakers, including configuration and label attachment.
Important warnings and guidelines before connecting speakers to the AV receiver.
Step-by-step guide on how to strip and connect speaker cables to terminals.
Instructions for connecting FM and AM antennas for radio reception.
Guidance on connecting an outdoor FM antenna for better reception.
Guidance on connecting an outdoor AM antenna for improved reception.
Instructions for using an antenna splitter to share reception.
Explains how to connect audio and video signals simultaneously for component inputs.
Guides on making video and audio connections between the receiver and TV/projector.
Instructions for connecting a DVD player, including video and audio hookups.
How to connect players with multichannel analog audio outputs.
Guides on connecting VCRs or DVD recorders for playback and recording.
Instructions for connecting recorders for the purpose of recording.
How to connect satellite receivers, cable boxes, and other video sources.
Guides connecting camcorders, game consoles, and similar devices.
Explains HDMI connectivity, its features, and supported formats.
Detailed steps for establishing HDMI connections between components.
Guides for connecting CD players and turntables, including phono preamp requirements.
Instructions for connecting HDD components like the RI Dock.
How to connect tape recorders, CDR, MD, and DAT recorders.
How to connect and use Onkyo components with the RI interface.
How to use the receiver's AC outlet to power other components.
Instructions for connecting the AV receiver's power cord to a wall outlet.
How to power the AV receiver on and off using the unit or remote.
Step-by-step guide to automatically configure speaker settings using the included microphone.
Lists and explains common error messages during automatic speaker setup.
How to review speaker configuration, distance, and level settings after auto setup.
How to manually adjust speaker settings if auto setup is insufficient.
Tips for setting up and detecting powered subwoofers with auto setup.
Overview of the menu structure for configuring AV receiver settings on-screen.
How to assign digital input jacks to input selectors for proper signal routing.
Explains how to assign video inputs, including HDMI, to input selectors.
How to assign component video inputs and configure S-Video/composite conversions.
How to change input display names for RI-capable components.
Setting minimum speaker impedance for North American models.
Setting the TV system format for non-North American models.
Setting the AM frequency step for radio tuning.
Step-by-step guide to choosing audio/video sources for listening and viewing.
How to connect and use components with multichannel analog audio outputs.
How to view current input source details and signal format.
How to adjust bass and treble for front speakers.
Adjusting the brightness of the receiver's front panel display.
Setting the receiver to turn off automatically after a specified time.
Instructions for connecting and using headphones for private listening.
Temporarily muting audio output from the AV receiver.
How to select AM/FM sources and tune into radio stations.
How to store and recall favorite radio stations and XM channels.
Explains the Radio Data System features for European models.
How to display text information broadcast by RDS radio stations.
How to search for radio stations based on program type.
How to search for and listen to traffic news broadcasts.
Instructions for setting up and using XM Satellite Radio service.
How to connect the XM Passport System for XM radio reception.
How to enable XM Satellite Radio service in the receiver's settings.
Steps to register for an XM Satellite Radio account.
Various methods to select XM radio channels: search, category, or direct tuning.
How to select XM channels using the receiver's front panel controls.
How to view details of the currently playing XM channel.
How to quickly switch back to the previously selected XM channel.
How to adjust the XM Passport System's position for optimal signal reception.
Overview of how to choose listening modes based on source and connections.
How to select listening modes using buttons directly on the AV receiver.
How to select listening modes using the provided remote control.
Detailed explanation of each listening mode and its application.
Explains Onkyo's proprietary DSP sound modes.
How to record audio and video signals to external components.
How to record audio and video from different sources simultaneously.
How to soften overly bright movie soundtracks for a better theater experience.
Reduces dynamic range for quiet parts in Dolby Digital audio at low volumes.
How to manually adjust the volume level for each speaker.
How to configure speaker settings like size, crossover, and impedance.
Setting the LFE channel's cutoff frequency to filter unwanted hum.
Boosting bass output by routing front channel bass to the subwoofer.
How to set speaker distances for accurate sound arrival at the listener.
Calibrating speaker levels using test tones for balanced sound output.
Adjusting the equalization (EQ) for individual speaker frequencies.
Settings related to multichannel DVD inputs, including SW input sensitivity.
Adjusting audio settings like Multiplex, Panorama, and Dimension.
Setting default listening modes for each input source.
Adjusting input levels for sources with different volume outputs.
Configuring maximum volume, power-on volume, and display settings.
Changing the receiver's remote control ID to avoid conflicts.
Setting whether audio from HDMI IN is output via HDMI OUT.
Locking setup menus to prevent accidental changes.
Manually setting digital input formats (PCM, DTS, Auto).
Adjusting audio delay to synchronize with video signals.
Changing remote control ID to avoid interference with other components.
Guides on connecting Zone 2 audio sources using amps or speakers.
Enabling Zone 2 speakers for sound output.
How to turn Zone 2 on/off, select sources, and adjust volume.
How to adjust the volume specifically for Zone 2 audio playback.
How to control the AV receiver from Zone 2 using multiroom kits.
Steps to program the remote to control other manufacturer's components.
Specific remote control codes for Onkyo components linked via RI.
How to reset remote mode buttons to default codes.
How to reset the entire remote controller to factory settings.
How to operate a TV using the receiver's remote control.
How to operate a VCR using the receiver's remote control.
How to operate a satellite or cable receiver using the remote control.
Troubleshooting steps for power-related problems like not turning on.
Solutions for problems related to sound output, volume, and speaker performance.
Troubleshooting steps for remote control malfunctions and component control problems.
Troubleshooting steps for problems related to video output and picture display.
Troubleshooting steps for poor radio reception or FM stereo issues.
Troubleshooting steps for problems related to Zone 2 audio playback.
Solutions for various miscellaneous problems including headphones, display, RI, and setup errors.
