57Instruments, controls
I
Engine oil pressure
Control indicator illum inates in red.
Illuminates when the ignition is switched on
and goes out shortly after the engine has
started.
If it illuminates when the eng ine is running:
Engine lubrication may be interrupted.
This m ay result in da mage to the eng ine
and/or lock ing of the drive wheels:
1. Move out of the flow of traffic as quickly
as possible w ithout impeding other
vehicles.
2. Depress clutch.
3. Shift into neutral.
4. Switch off ignition.
Check engine oil level before consulting a
workshop.
9 Warning
W hen the engine is off, cons id erably
more force is ne ed ed to brak e and stee r.
Do not rem ov e ke y un til ve hicle h as come
to a standstill, otherwise the steering
column loc k could eng age unexpectedly.
W
C ool ant temp era ture
Control indicator illuminates in red.
If it illuminates w hen the engine is running:
Stop and switch off engine. Coolant
temperature too hig h: Danger of engine
dam age. Check coolant level –
see page 154.
v
Airb ag s y ste m s, bel t te n sion ers
Control indicator illuminates in red.
If it illuminates w hen the engine is running:
Fault in airbag system or belt tensioners –
see pages 41, 45.
X
Driver’s seat belt
Control indicator illuminates or flashes in
red.
Illumin ates fo r app ro x . 2 0 se cond s w he n
the ignition is switched on, or until driver’s
seat belt is fastened. Flashes for a further
60 seconds if seat belt remains unfastened.
If seat belt remains unfastened when the
vehicle is being driven, control indicator
illuminates for approx. 20 sec onds and
flashes for a further 60 seconds.
Apply seat belt – see pa ge 42.
Control indicator goes out imm ediately.
Seat b elts - see page 39,
Further information - see pag e 43.
To Next Page